Negotiable
The date of payment from buyers deliver within days
Beijing
Long-term effective
2023-12-24 06:20
390
Company Profile
Best(Hebei) Technology Co., LtdBy certification [File Integrity]
Contact:best111(Mr.)
Email:
Telephone:
Phone:
Area:Beijing
Address:Beijing
Website:http://www.best-gr8.com/ http://best111.nrktech.com/
This 65HRC 4 flutes flat end mill is available in various sizes from 1mm to 20mm. We use the highest quality high-speed steel on the market as its raw material, just to prolong the service life of the product and reduce the need for frequent replacement. The four grooves are designed to smooth the cutting edges of this milling cutter, giving the final product a clean finish. At the same time, this design ensures optimum chip removal and reduces the risk of accidents. After a special hardening process, the hardness of this milling cutter reaches 65 HRC so it can effectively improve processing efficiency and reliability. Compared with the same type of products on the market, our milling cutters can cut various types of materials such as steel, aluminum, stainless steel, high-temperature alloys, etc., without frequent replacement. If you want to buy, please contact us now to learn more about this product.
Â
Product advantages
1. The hardness of 65HRC makes this 65HRC 4 flutes flat end mill well able to cope with high-strength and high-speed milling work.
2. This milling adopts nano-coating technology, which makes the surface of the cutter smoother and harder, and has the advantages of anti-wear and anti-reflection.
3. The overall hard high-speed steel material can effectively prevent the grain boundary separation of the cutting edge, and at the same time extend the service life of the cutting tool.
4. The 4-flute design can provide better chip discharge effect, improve process efficiency and reduce equipment loss.
5. This milling is widely used. It is suitable for cutting non-ferrous metals such as aluminum, brass and copper, as well as various plastics and wood.
Â
Â
Â
Â
Â
Â
65HRC 4 Flutes Solid Carbide Square Endmills with Nano Coating
Â
Â
SPECIFICATION | d1 | L1 | D | L |
D1*3*D4*50L | 1mm | 3mm | 4mm | 50mm |
D1.5*4.5*D4*50L | 1.5mm | 4.5mm | 4mm | 50mm |
D2*6*D4*50L | 2mm | 6mm | 4mm | 50mm |
D2.5*7.5*D4*50L | 2.5mm | 7.5mm | 4mm | 50mm |
D3*9*D4*50L | 3mm | 9mm | 4mm | 50mm |
D3.5*10*D4*50L | 3.5mm | 10mm | 4mm | 50mm |
D4*12*D4*50L | 4mm | 12mm | 4mm | 50mm |
D4*16*D4*75L | 4mm | 16mm | 4mm | 75mm |
D4*20*D4*100L | 4mm | 20mm | 4mm | 100mm |
D5*15*D5*50L | 5mm | 15mm | 5mm | 50mm |
D5*20*D5*75L | 5mm | 20mm | 5mm | 75mm |
D5*25*D5*100L | 5mm | 25mm | 5mm | 100mm |
D6*18*D6*50L | 6mm | 18mm | 6mm | 50mm |
D6*24*D6*75L | 6mm | 24mm | 6mm | 75mm |
D6*30*D6*100L | 6mm | 30mm | 6mm | 100mm |
D8*24*D8*60L | 8mm | 24mm | 8mm | 60mm |
D8*30*D8*75L | 8mm | 30mm | 8mm | 75mm |
D8*35*D8*100L | 8mm | 35mm | 8mm | 100mm |
D10*30*D10*75L | 10mm | 30mm | 10mm | 75mm |
D10*45*D10*100L | 10mm | 45mm | 10mm | 100mm |
D12*35*D12*75L | 12mm | 35mm | 12mm | 75mm |
D12*45*D12*100L | 12mm | 45mm | 12mm | 100mm |
D14*45*D14*100L | 14mm | 45mm | 14mm | 100mm |
D16*45*D16*100L | 16mm | 45mm | 16mm | 100mm |
D18*45*D18*100L | 18mm | 45mm | 18mm | 100mm |
D20*45*D20*100L | 20mm | 45mm | 20mm | 100mm |
D6*45*D6*150L | 6mm | 45mm | 6mm | 150mm |
D8*50*D8*150L | 8mm | 50mm | 8mm | 150mm |
D10*60*D10*150L | 10mm | 60mm | 10mm | 150mm |
D12*60*D12*150L | 12mm | 60mm | 12mm | 150mm |
D14*70*D14*150L | 14mm | 70mm | 14mm | 150mm |
D16*75*D16*150L | 16mm | 75mm | 16mm | 150mm |
D18*75*D18*150L | 18mm | 75mm | 18mm | 150mm |
D20*75*D20*150L | 20mm | 75mm | 20mm | 150mm |
Â
Tolerances | ||
Flute Diameter | Flute Diameter Tolerance | Shank Diameter Tolerance |
Φ1.0-Φ2.9 | 0~-0.02 | H6 |
Φ3-Φ6 | -0.01~-0.03 | |
Φ6-Φ10 | -0.01~-0.035 | |
Φ10.0-Φ18.0 | -0.01~-0.04 | |
Φ18.0-Φ20.0 | -0.015~-0.045 |
Â
Application | ||||||||
Carbon Steel | Pre-harden steel | High-hardened | Stainless Steel | Copper Alloy | Aluminum Alloy | |||
45HRC | 50HRC | 55HRC | 60HRC | 65HRC | ||||
○ | ○ | √ | √ |  |  | ○ | ○ | ○ |
Â
Â
Material | Carbon Steel, Alloy Steel, S45C, FC, FCD, SCM, S50C, SKS... | Alloy Steel, Tool Steel SCR, SNCM, SKD11, SKD61.NAK80 | Hard Steel, SKD11 | |||
Hardness | HRC30 | HRC50 | HRC60 | |||
Diameter | Cutting speed(VC) (mm-1) | Feed(F) (mm-min) | Cutting speed(VC) (mm-1) | Feed(F) (mm-min) | Cutting speed(VC) (mm-1) | Feed(F) (mm-min) |
1mm | 22000 | 400 | 18000 | 200 | 9000 | 140 |
1.5mm | 12000 | 500 | 11000 | 280 | 5200 | 150 |
2mm | 10000 | 550 | 10000 | 280 | 4600 | 170 |
3mm | 9000 | 600 | 5500 | 310 | 3500 | 220 |
4mm | 6000 | 750 | 5000 | 400 | 2200 | 220 |
5mm | 4800 | 800 | 4000 | 400 | 1700 | 240 |
6mm | 4500 | 820 | 3800 | 420 | 1600 | 300 |
8mm | 3500 | 820 | 2800 | 420 | 1000 | 300 |
10mm | 3000 | 820 | 1800 | 420 | 900 | 300 |
12mm | 2000 | 820 | 1600 | 350 | 800 | 300 |
16mm | 1500 | 650 | 1000 | 300 | 500 | 150 |
20mm | 1200 | 650 | 900 | 300 | 400 | 150 |
Â
Â
Â
Grade | ISO Code | Chemical Compositions(%) | Grain Size(um) | Physial Mechanical Properites(≥) | Coating | |||
Wc | Co | Density(g/cm3) | Hardness (HRA) | T.R.S(N/mm2) | ||||
YG10X(50HRC) | K30-K40 | 89 | 10 | 0.8 | 14.43 | 91.5 | 2500 | TISIN |
UF12U(55HRC) | K40 | 87 | 12 | 0.6 | 14.15 | 92.3 | 3900 | TISIN |
AF501(60HRC) | K05-K10 | 89 | 10 | 0.4 | 14.1 | 92.8 | 3600 | NANO BLACK |
AF308(65HRC) | K05-K10 | 91 | 8 | 0.3 | 14 | 93.8 | 3800 | NANO (BLUE) |
Â
Â
Â
4 Flutes square Carbide milling cutter | 4 Flutes square Carbide cutter | 4 Flutes square end mill |
 |  |  |
Â
Â
Â
1. Product quality control and delivery time is strictly controlled;
2. Direct manufacturing factory offering competitive price;
3. All the inquiries will be replied within 12 hours;
4. OEM & ODM service are available;
5. Providing first-class after-sales services to the customers.
Â
Â
Â
Â
Â
1. Q: Is your price competitive?
A: Only good quality machine we supply. Surely we will give you best factory price based on
superior product and service.
Â
2. Q: why choose us?
A: We are one of High-tech Enterprises, AAA Contract and Trustworthy Enterprises, AAA Technology Consulting Firm.
Â
3. Q: Features for Steel Platform with Plastic coating finish?
A: Color Plastic Spraying on platform surface with comptitive price compared with the aluminum alloy and hot dip gavalnized surface.Hot dip galvanized steel platform with good Anti corrosion and Lower price than Aluminum alloy platform.
Â
4. Q: How is your price level?
A: Factory direct sale, we have whole production line work process from platform to main parts.
Â
5. Q: What payment terms do you accept?
A: T/T or L/C or West Union or Moneygram or Paypal,others is welcome.
Â
http://www.best-gr8.net/